Originally Posted by edsmith. The link for the retracts for the mig are now not available from hk. If it’s a draggy airframe and you like a lot of vertical punch, stick with larger props and less pitch like a 9×6 or so. Unfortunately, I dont have access to a watt meter, to see whats happening here. You really should get a watt meter but in this case I think the motor was mislabled at the factory. Thanks for the help! Any suggestions for replacements? Apr 21,
Prop test on HXT kv. May 08, , Sign up now to remove ads between posts. Viewing 15 posts – 1 through 15 of 34 total. Return to Power Systems. Mar 28, Something is not quite right with that.
Is there a minimum shaft length I should look for or are they all pretty much the same size in each class of motor? Generally speaking, the prop diameter and pitch both affect the motor’s power draw. I think the linked retracts have changed to this https: Reversing the shaft on a NTM Originally Posted by edsmith Something is not quite right weries that.
NTM Prop Drive Series 35-42A 1250Kv 600W
Remember Me Forgot Password? Alternative Mig15 Retracts are available here. You just might have to prop down until the motor is cool or warm enough to live. Mar 28, If it’s a swoopy plane that you really want to cook, try a smaller diameter prop and keep the pitch up high like an 8×8.
Something is not quite right with that. You must be logged in to reply to this topic. Any suggestions for replacements? Return to Power Systems. May 06, I guess Prpp should have posted this here. I was thinking it is overpropped at 9×8. Unfortunately, I dont have access to a watt meter, to see whats happening here. Prop test on HXT kv. In your case, a wattmeter 1250kvv not help you because of the airflow around the motor.
Some linked items from userguide out of stock and you are looking for substitute, please post, together we can find a replacement or another supplier. That motor weighs almost 6 ounces and is rated for watts at 3S.
Sounds like the motor doesn’t have the greatest airflow around it but perhaps there’s nothing that can be done about that.
Turnigy /6 KV is the wrong way around – 3DLabPrint
Mig Nose Gear Mounting Plates. If it’s a draggy airframe and you like a lot of vertical punch, stick with larger props and less pitch like a 9×6 or so. Try propping down to a 9X6 and see what happens, if it is still getting hot either get some air to it or get another motor cause a 9X6 should not pull even close to watts on 3S at KV.
Thanks for the help! Apr 09, Sign up now to remove ads between posts. Yes, thats the motor kv W 45A.
Jan 26, Yes, I saw that aerodrive and thought it might work. Is there an alternative you guys suggest? Last edited by yomgui; May 08, at May 08, I ordered 8×6 and 8×8 props yesterday. An 8×6 should keep the motor under or near 50A on 4S, that’s already Serise
RC equipment not available…. And if so, 35-42aa it work with the rest of the recommended Eco setup the same battery and ESC, or does it need an upgrade? Looking for some repalce of HSMG, same size and modification.
Everything is available on the HK site except the servos https: Originally Posted by edsmith. You must be logged in to view attached files. Look for another Stearman engine?
What would a good alternative be Eco setup?